Hebster progress.· Page 2 · International Vintage Volkswagen Forums

Hebster52
pre67vw Junkie Topic Starter

8 years ago

Now the first pivotpart is welded to hinge joint and prefitted to the b-pillar parts. This week the b-pillars will be welded!

Edited by user 8 years ago | Reason: Not specified

The HebsterWerks.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#22

Finally some welding again! :)

The HebsterWerks.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#23

Had to take a brake in the garage when our 6 year old got sick. So we sat at home cutting some cardboard to figure out the final geometry of all moving parts of the frame… :)

Short vidclip here..

Edited by user 8 years ago | Reason: Not specified

The HebsterWerks.

usariemen
pre67vw Junkie

8 years ago

#24

Damn!
I am so glad I have the original frame and do not have to do this for my car.
Looks like a hell of a job.
But also looks like it will work in the end.

Master of my domaine.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#25

I like the little challenge envolved in this work. And at the end it is not that complicated..
Well. I have had a lot of help from Peter to be able to visualize this. 🙂

Edited by user 8 years ago | Reason: Not specified

The HebsterWerks.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#26

Next pieces in the puzzle! :d

The HebsterWerks.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#27

Hinges done! 😃

The HebsterWerks.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#28

Now I have finished the main parts and tested to mock them up. Next is making all small detail parts so I can finally assemble the frame... 🙂

The HebsterWerks.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#29

Today I had to start mock up the shape and height of the main bows... 🙂

The HebsterWerks.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#30

Now I will not be able to go out to the car garage for two weeks due to winter holidays etc. But decided to work some "at distance" at home instead… So I started some woodworking out of Maple. Cut the big trees and chopped to suitable lengths 14 years ago with the thought of using for this cab frame…

So, here is the first part for the main bow… (Yes, I also have made the wooden table many years ago… 😉 )

The HebsterWerks.

JD
pre67vw Junkie

8 years ago

#31

You´re really cracking on with this. Keep it up!

"John, you need to get a grip and STOP MOANING AT EVERYTHING. ThumbDown "

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#32

All parts cut for rear upper bow. What is the thickness on the middle on originals?

The HebsterWerks.

usariemen
pre67vw Junkie

8 years ago

#33

In the middle. 71 Millimeters high and 20 Millimeters thick.

Along the lower edge there is an area where the thicknes goes down from the 20 to 15 Millimeters.

Master of my domaine.

usariemen
pre67vw Junkie

8 years ago

#34

Oh, the rear UPPER bow.
I check that one also.
Just a Minute.

Master of my domaine.

usariemen
pre67vw Junkie

8 years ago

#35

Number 1 is in the middle 30 Millimeters thick and 32 Millimeters high.
Number 2 is in the middle 30 Millimeters thick and 28 Millimeters high.

Edited by user 8 years ago | Reason: Not specified

Master of my domaine.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#36

Thank you! Was aiming at 30mm x 30mm so I was not too far off... 🙂

The HebsterWerks.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#37

Would it be possible to get a photo where 2 is placed on top of 1 just to see if the lenghts differ much and also for comparison of the shapes.. ? 🙂

Edited by user 8 years ago | Reason: typos..

The HebsterWerks.

usariemen
pre67vw Junkie

8 years ago

#38

I can make one tomorrow.

Master of my domaine.

Hebster52
pre67vw Junkie Topic Starter

8 years ago

#39

Glued and raw sawed.. 🙂 Now to plane it to 31mm thick and then cut the bow shape.. :)

The HebsterWerks.

usariemen
pre67vw Junkie

8 years ago

#40

Here we go.
My new ones are already screwed to the metal frame.
I made pics of the old original ones.

Edited by user 8 years ago | Reason: Not specified

Master of my domaine.

Important Information:

The International Vintage Volkswagen Forums uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close