john_boy1959
2013-11-16T23:30:06Z
hi everyone. Am pilling my 36hp apart for the first time and would like to know how do you undo the the two closely spaced head bolts right behind the inlet port! Do you have to remove the studs which hold the inlet manifold onto the head, is there a special tool/ or do you machine a 15mm socket down to a certain size? Hope you can help.
Sponsor


(Register and log-in to hide thread adverts)
Mike Peckham
2013-11-17T07:29:05Z
Just remove the studs that hold the inlet manifold on, and then you can get a standard socket on the head nuts.

Mike
July 1957 UK supplied RHD Oval. 1972 World Champion Beetle. 1978 UK supplied RHD 1303LS Cabriolet. 1973 UK supplied RHD 1303s.
Rich Oakley
2013-11-17T13:45:43Z
You need a thin-walled 15mm socket. A lot of sockets are too fat. Draper do the right one that fits.
47 Beetle, 56 UK Karmann Cabriolet, 56 UK Beetle, 57 UK Type 2, 59 UK Beetle, 66 UK Fastback.
Similar Topics
Users browsing this topic