THEBOFFIN
15 years ago
Hi All

here's my'ginger'!! 😃 1956 Oval Convertible project.

came as a shell with the original hoodframe

as you can see it needs a bit of sand down, but it is only surface,was paint stripped and left in the elements by a previous owner! and is one of the most solid bugs i have seen in 20 years of bugging!...heater channels strenghtheners, rear h valance and inner wings are all solid!..
needs some minimal welding and panel reparwork but nothing drastic!

unfortunately lost its original pan, but i have a semi restored 62 pre suffix reg pan to put it on, and an original 30 horse 56 engine to fit.


anyway watch this space for progress pics!

adam

UserPostedImage

UserPostedImage

UserPostedImage

UserPostedImage

UserPostedImage

UserPostedImage

UserPostedImage
Sponsor
Log-in to remove these ads
THEBOFFIN
15 years ago
Hey all

check this link to this superbly restored original numbers, 1957 cabrio in the states!..great pics..enjoy!

https://www.nevintage.com/1957vert.htm 

cheers
adam
THEBOFFIN
15 years ago
now i'm back on resto duties!, here are a few more pics,

shell has a bit more rust in the sill strengtheners than i thought but nothing i can't handle!
UserPostedImage
UserPostedImage

cleaned up
UserPostedImage


same on the other side,
UserPostedImage
UserPostedImage

some better views of the other areas, now she's on her side!

UserPostedImage
UserPostedImage

also here's the rear quarter, which has been butchered by someone previously, i guess in order repair the creases and 'holes' in the rear quarter, caused apparently by buckshot when it was used for target practice while in the states!

UserPostedImage

but i have a complete rear quarter to replace it with!.(thanks VWRobert!)

UserPostedImage
UserPostedImage

and picked up some nice early doors too!(thanks again VWRobert!)

UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage


keep watching, more pics and fnally some progress to come!
THEBOFFIN
15 years ago
Hi
quick update, finished cleaning rust off of scuttle/windscreen area, all by hand with mixture of hammerite rust remover wire brush, wire wool, course grade emery paper and a lot of elbow grease!!..big job and busy with work at the moment!..anyway here are a couple of pics of some the bare areas.,

UserPostedImage
UserPostedImage
THEBOFFIN
15 years ago
Finally my genuine original rear oval vert rear window has arrived from the states in one piece!..in amazing condition for a 53 year old window!...needs new wood and rubber, but frame, glass and chrome strip is in amazing condition! 😃
real lucky find...except for the price :shock: ...well chuffed!..a long way off fitting it yet though!! :lol:
UserPostedImage
UserPostedImage
UserPostedImage
THEBOFFIN
15 years ago
pushed the vert out of the garage for a few pics...
😃 :shock:

UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
THEBOFFIN
15 years ago
cleaned back windscreen and scuttle completely now,just a little bit of rust in the groves to remove, then just needs priming!
😃
UserPostedImage
UserPostedImage
UserPostedImage


also paint stripped dash and sanded off, original colour looks to have been inca red.. under the bright red primer..
before..

UserPostedImage

...after

UserPostedImage
THEBOFFIN
15 years ago
just got round to priming windscreen and dash after rust removal! 😃

UserPostedImage
UserPostedImage
UserPostedImage

Lots of drilled holes under the dash! :shock: ...can anyone tell me which are the correct factory ones?...as i need to weld the rest up!

UserPostedImage
pre67vw
15 years ago
Nice work, keep us updated!! 😎
Rob Amos
Happiness is a stock VW
Etzhold1
15 years ago
Nice work, keep us updated!!
one thing, I would remove these ! you will be surprised how it looks underneath, probebly surface rust, but if your car is painted these are the spots where it start showing rust after a few years !

Regards
Guido  15786.jpg You have insufficient rights to see the content.
THEBOFFIN
15 years ago
more pics, front qtr panels cleaned back and primed
UserPostedImage
UserPostedImage
UserPostedImage
UserPostedImage
correct repro 4 finger front panel to replace two finger 67 one currently fitted...will be removing this carefully and putting it up for sale, if anyone needs a genuine solid vw one let me know!
UserPostedImage

still unsure on colour...removed dash brace...still in original colour!...can anyone confirm if it's inca red??..looks like it make have a metalic fleck in it??..i thought it was a solid colour...can anyone confirm?
UserPostedImage
UserPostedImage
Chris
15 years ago
Nice work :wink:

Just one thing / question:-

The floorpan is RHD but has a LHD dash. Are you going to put a new dash in and convert it or do you have a LHD floorpan for it ?

Just being curious, (nosey :roll: )

Chris


A day may come when the courage of men fails, when we forsake our friends and break all bonds of fellowship, but it is not this day.
THEBOFFIN
15 years ago
Hi

i did have a RHD oval dash...but decided to keep it as original as i can LHD, so i'm modifying the pan to LHD...much easier than a dash cut too! 😃
heb623
15 years ago
When you like the perfect chassis for your car contact Eztzhold1!
He stil has a 1956 powdercoated chassis forr sale! :wink:


:twisted: ET

I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
THEBOFFIN
15 years ago

When you like the perfect chassis for your car contact Eztzhold1!
He stil has a 1956 powdercoated chassis forr sale! :wink:


:twisted: ET

"heb623" wrote:



saloon or cabrio one??!!
'50 Karmann
15 years ago


saloon or cabrio one??!!

"THEBOFFIN" wrote:



They are the same thing! Aren't they
As far as a fifty goes the floor pan is no different,don't know too much about those modern cars 'tho. But i think you wiil find Guido's chassis will be ideal.
heb623
15 years ago
That makes no difference for a cabrio out of 1956! 😳 😳
Chassisnumbers with the digits 15 in front are only used starting 1965!!!
So you must have a 6 digit chassis!

:twisted: ET
I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
'50 Karmann
15 years ago
Thanks for confirming that ET
I was sure they were the same.
But it's one of those open your mouth and put your foot in it, moments.
heb623
15 years ago
Thank you very much George I am glad I could be of any assistance! :lol:
Btw can you send me a pic of yourself?
I know who you are but I can't put a face to it! :oops: :oops:

Alsways there to help!

:twisted: ET (the friendly one)


I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
'50 Karmann
15 years ago
I'm a shy sort of guy ET and always avoid the photographs. :lol: .
But try to see August '06 Volksworld.Ivan would not let me get away with it.
I'm picture with my car 😎 sort of ------- Beauty and the Beast.