Professionally Restored Solex 28 pci Carb
Pre - 1967 Volkswagens listed by collectors and enthusiasts around the world.
Interested in something similar, or have one of your own?
Archived
1953 · Posted 29 Sep 2010
This advert is part of the sold and archived listings.
Original description:
Fully restored Solex 28 pci Carburettor for 30(36)hp VW engines.
Completely stripped and all components were subjected to a four part chemical cleaning process which is the only effective way to remove dirt and corrosion from the internal circuitry as well as restoring the castings to their original appearance. Mating faces were re-machined to ensure flatness. The throttle spindle housing was re-bushed using P.T.F.E. lined glacier type bushes and line reamed to correct tolerance.
Steel components were de-rusted and inhibited and Brass components are chemically brightened.
Re-assembled using all new wearing components, i.e.:
Throttle spindle
Float needle valve
Throttle plate
Volume/Air screw
Throttle plate screws
Diaphragms
Metering needle
Seals and washers
Jet Ancillaries
Gaskets
Any other components found to be faulty were replaced. All internal components were adjusted and set as per manufacturer's specification.
Engine tested to ensure correct functioning of the following:-
Fuel level, Idle circuit, Choke mechanism, By-pass circuit, Pull down and fast-idle operation, Progression circuit, Correct throttle operation, Main circuit, Correct response to mixture adjustment, Pump circuit.
£120 plus postage.
Can ship worldwide.
Completely stripped and all components were subjected to a four part chemical cleaning process which is the only effective way to remove dirt and corrosion from the internal circuitry as well as restoring the castings to their original appearance. Mating faces were re-machined to ensure flatness. The throttle spindle housing was re-bushed using P.T.F.E. lined glacier type bushes and line reamed to correct tolerance.
Steel components were de-rusted and inhibited and Brass components are chemically brightened.
Re-assembled using all new wearing components, i.e.:
Throttle spindle
Float needle valve
Throttle plate
Volume/Air screw
Throttle plate screws
Diaphragms
Metering needle
Seals and washers
Jet Ancillaries
Gaskets
Any other components found to be faulty were replaced. All internal components were adjusted and set as per manufacturer's specification.
Engine tested to ensure correct functioning of the following:-
Fuel level, Idle circuit, Choke mechanism, By-pass circuit, Pull down and fast-idle operation, Progression circuit, Correct throttle operation, Main circuit, Correct response to mixture adjustment, Pump circuit.
£120 plus postage.
Can ship worldwide.
Advertiser Info
Views
This advert has been viewed 1008 time(s)