Posted by: louis - 06 October 2007 20:53:46
is someone has the okrasa manual, need to have info to build it. thanks, Louis

Posted by: Andy Sparks - 07 October 2007 11:23:42
No manual but a bit of experience, what questions do you have?

Posted by: louis - 08 October 2007 00:38:02
was wondering if i use the same rocker arm as original and where to run the oil line from the fram. thanks, Louis

Posted by: joe h. - 08 October 2007 06:09:59
Louis, you should have asked The Man. He would have printed you out a set. I could send it to you, I also have the Operating and Maintenance Manual, and the schematic for clearancing the piston skirt and rods for a stroker crank. The best thing to do is research. I have read every thread in this forum (thanks guys) Also do a search on The Samba Here's a couple of links for ya. https://imageevent.com/mrokrasa https://vwjudsonregister.tripod.com/stephs-oil-lines.htm BTW, the stock rockers will work fine, as well the springs if there in good condition. For the oil lines you use a special fitting for the oil sender and one of the distributor bolts. Look at the pics on Mr Ruiz's site closely and you can see them.

Posted by: louis - 08 October 2007 09:47:20
thanks buddy!

Posted by: Andy Sparks - 08 October 2007 22:44:05
you can get good oil lines on the judson registry site, not a fan of the bee hive idea, as you will suck in warmer air.