Sambaguy
13 years ago
Me and Bengt H are about to reproduce a few inner handles for the top.

I have an original one as a master but we are a little unsure about the finish of the crome.

Are anybody of you sure about the finish? Shall the cromed handle be polished in high finish or was it only cromed over the rough casting.

Please let us know.

Sambaguy & Bengt

 cab handle.JPG You have insufficient rights to see the content.
Sponsor


(Register and log-in to hide thread adverts)
VW Stan
13 years ago
They were missing from Heb #601 and I was told that they are the same as early porsche hood handles, so they may be available from somewhere already!

Haven't found any though!

:wink:

It's hard to say what my girlfriend does for a living...

...She sells sea shells on the sea shore!
usariemen
13 years ago
They where casted from brass and polished before they got chromed.
The ones I know have a high end chrome finish.
By the way ... I will need one if you really make some.
The one I have could be used as a master sample too.
Master of my domaine.
brille52
13 years ago
Hello Sambaguy & Bengt -

I still need two of them, so if possible, put me in line - Thanks !

a8)
Bengt H
13 years ago
Here it is, frech from the casting
UserPostedImage
usariemen
13 years ago
Hej Bengt!
Looks allready really good. Nice Job.
Well done.
Master of my domaine.
zelensis61
13 years ago
Nice parts,
Any idea what the price is for a set?
Raw or chromed?
Thanks. Peter
ZELENSIS, coachbuilt body from the 50's on a vw platform made in Belgium. Peter the heb detective
Bengt H
13 years ago
No price yet, if we sell them raw or chromed depends a litle of if we can find a good chromshop.

Are there any interest in Karmann handles??
55Kab
13 years ago
Bengt H wrote:

Are there any interest in Karmann handles??



Nice job Bengt, they look good.

Not sure about the Karmann handles. The hood pull down handles were missing on my car but I got them (repro) from Chuck's so they are already available.

Bengt H
13 years ago
55Kab wrote:



Nice job Bengt, they look good.

Not sure about the Karmann handles. The hood pull down handles were missing on my car but I got them (repro) from Chuck's so they are already available.



Can you post a pic of them, I have seen that there are sligthly different versions of Karmann handles,
my -50 handles are fater than the ones in my -57.
heb623
13 years ago
Hello B & S,

Looking very nice!!!:shock:
If I needed one or a pair I certainly would come to you!:roll:
But they were with my Heb when I bought!:wink:

:twisted: ET
I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
oval56
13 years ago
i would also take a set :d
www.oval56.de
www.oval56.com

DBK Germany
55Kab
13 years ago
Bengt H wrote:

Can you post a pic of them, I have seen that there are sligthly different versions of Karmann handles



Here you go Bengt

UserPostedImage

Bengt H
13 years ago
Thanks 55Kab, what did they cost?
55Kab
13 years ago
Bengt H wrote:

Thanks 55Kab, what did they cost?



$40.00 the pair
vintagevw
13 years ago
Karmann parts are much cheaper! :lol:
The price is low becouse there is a big market for them and I guess they used them till the mid sixties.
BTW nice work Bengt! :beer:
Wat is het fijn om lesbisch te zijn!
Bengt H
13 years ago
55Kab wrote:



$40.00 the pair



That is cheap!
overrestored
13 years ago
Sambaguy, Bengt

I have posted your photo on the 356 registry "356 talk" ... asking if these are the same as Pre A cabriolet...

I will advise and send your info to that group if you like?

I didn't want to give your contact info without permission...

Eric

here is the link



https://www.356registry.com/forum/viewtopic.php?t=10616 
protect me from what I want
Bengt H
13 years ago
overrestored wrote:

Sambaguy, Bengt

I have posted your photo on the 356 registry "356 talk" ... asking if these are the same as Pre A cabriolet...

I will advise and send your info to that group if you like?

I didn't want to give your contact info without permission...

Eric

here is the link



https://www.356registry.com/forum/viewtopic.php?t=10616 



Thanks Eric, interesting.
I have a friend with a 356 -54 cab, I will ask him to.
overrestored
13 years ago
Here are three pre A photos showing the handles... I can't be sure they are exactly the same... but they look pretty close.

There is already interest from one Pre A guy for some.

Can you guys provide the dimensions of the handle... width, length, and height?... I will forward to the 356talk list.

Thanks


UserPostedImage

UserPostedImage

UserPostedImage
protect me from what I want
Copyright © Rob Amos 2019. No part of this site can be reproduced without consent. | Terms & Conditions | Privacy Policy | Contact