Login Register
'50 Karmann
18 years ago
Can anyone tell me the exact lenth of the short piece of grooved trim above the Hebmuller decklid.
Also is it capped on both ends or are either of the ends open.
Thanks
George
Sponsor
Log-in to remove these ads
'50 Karmann
18 years ago
Guess you guys don't have original trim on your cars then :lol: 😃 :lol:
six-o-one
18 years ago
Hi,
I'd love to help but my car's not around at the moment, so I can't measure the trim for you.

But I will post the details here later if you don't find out from elsewhere in the meantime.

M
Lavenham Vintage VW Show - 2012 
Bandwagen | Vintage Volkswagens & Photography 
freaky
18 years ago
pic1  4501.jpg You have insufficient rights to see the content.
freaky
18 years ago
pic2  4502.jpg You have insufficient rights to see the content.
freaky
18 years ago
pic3  4503.jpg You have insufficient rights to see the content.
freaky
18 years ago
PIC4  4504.jpg You have insufficient rights to see the content.
freaky
18 years ago
the exact lenth of the short piece is 97,5 mm by 7,5 mm width
( measured inside )

I hope this is what you mean
heb623
18 years ago
He means the piece grooved trim mounted on the panel above the decklid! :roll:
I need to know the ecxact size too! (the one on my Heb is missing too) :shock:
As far as I know that piece of trim is closed at one side! (upper side)
The underside is open to allow to let the water run out! :wink:
Correct me if I am wrong!

:twisted: ET
I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
pre67vw
18 years ago
That looks a little like the SA Heb... :?:
Rob Amos
Happiness is a stock VW
heb623
18 years ago
Not mine anyway :lol:

:twisted: ET 😎


I ’ll never regret the things I did wrong!
I only regret the good things I did for the wrong people!
freaky
18 years ago
I hope this is what you mean
I take it off because it was fitted up side down  4509.jpg You have insufficient rights to see the content.
freaky
18 years ago
the lenght from the fold to the other end is 220 mm
( bud I don't know if the fold is really necessary )  4510.jpg You have insufficient rights to see the content.
freaky
18 years ago
😃  4511.jpg You have insufficient rights to see the content.
freaky
18 years ago
😃  4512.jpg You have insufficient rights to see the content.
freaky
18 years ago
the other side is just cut off  4513.jpg You have insufficient rights to see the content.
freaky
18 years ago
😃  4514.jpg You have insufficient rights to see the content.
freaky
18 years ago
😃  4515.jpg You have insufficient rights to see the content.
freaky
18 years ago
the side where the trim is closed the trim is made sharper like you see on the picture;
The distance from the fold to the place where the trim is tapering is 20 mm

I hope the trim is original

Please let me know if the fold is necessary !!  4516.jpg You have insufficient rights to see the content.
'50 Karmann
18 years ago
Thanks for the info.Will help a great deal.
The piece i have, actually has a finished end as on the door trims,it is not folded.
Similar Topics
Users browsing this topic