Louis, you should have asked The Man. He would have printed you out a set.
I could send it to you, I also have the Operating and Maintenance Manual, and the schematic for clearancing the piston skirt and rods for a stroker crank.
The best thing to do is research. I have read every thread in this forum (thanks guys)
Also do a search on The Samba
Here's a couple of links for ya.
https://imageevent.com/mrokrasa https://vwjudsonregister.tripod.com/stephs-oil-lines.htm BTW, the stock rockers will work fine, as well the springs if there in good condition.
For the oil lines you use a special fitting for the oil sender and one of the distributor bolts.
Look at the pics on Mr Ruiz's site closely and you can see them.