I am having brake truble with my 67 beetle, any help would be appreciated.
All the info,
4 wheel drums, with split master cylinder
master cylinder, brake lines, brake hoses, adjusters, wheel cylinders,
pads, drums, and hardware are all new.
I bled system and there is absolutely no air. The master cylinder doesn't
build enough fluid pressure to apply brakes on front wheels. all brakes are adjusted.
I disconnected where the steel line meets the rubber to check pressure, the pressure
is very light, which rules out the wheel cylinder. I have also ruled out the master cylinder,
this is the forth one I have tried. I tried the one that was on the car, 2 remanufactured,
and another brand new. From all my experiance, this would normally point to the master
cylinder, but I am stumped this time. Any thoughts would be appreciated.
Thanks