Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

4 Pages<1234>
Hebster52 Offline
#21 Posted : 07 February 2016 08:15:38(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Now the first pivotpart is welded to hinge joint and prefitted to the b-pillar parts. This week the b-pillars will be welded!



Edited by user 07 February 2016 08:16:26(UTC)  | Reason: Not specified

Hebster52 Offline
#22 Posted : 09 February 2016 18:19:37(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Finally some welding again! :)



Hebster52 Offline
#23 Posted : 12 February 2016 07:38:39(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Had to take a brake in the garage when our 6 year old got sick. So we sat at home cutting some cardboard to figure out the final geometry of all moving parts of the frame… :)

Short vidclip here..
https://youtu.be/-RdnQdSG1Mo

Edited by user 12 February 2016 07:39:22(UTC)  | Reason: Not specified

usariemen Offline
#24 Posted : 12 February 2016 23:07:50(UTC)
usariemen


Rank: pre67vw Junkie

Joined: 22/09/2007(UTC)
Posts: 148
Location: Germany

Was thanked: 11 time(s) in 8 post(s)
Damn!
I am so glad I have the original frame and do not have to do this for my car.
Looks like a hell of a job.
But also looks like it will work in the end.
Master of my domaine.
Hebster52 Offline
#25 Posted : 13 February 2016 06:11:14(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
I like the little challenge envolved in this work. And at the end it is not that complicated..
Well. I have had a lot of help from Peter to be able to visualize this. :)

Edited by user 13 February 2016 06:11:52(UTC)  | Reason: Not specified

Hebster52 Offline
#26 Posted : 14 February 2016 18:41:58(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Next pieces in the puzzle! BigGrin

Hebster52 Offline
#27 Posted : 15 February 2016 20:04:44(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Hinges done! BigGrin



Hebster52 Offline
#28 Posted : 16 February 2016 19:39:15(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Now I have finished the main parts and tested to mock them up. Next is making all small detail parts so I can finally assemble the frame... :)




Hebster52 Offline
#29 Posted : 20 February 2016 14:01:01(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Today I had to start mock up the shape and height of the main bows... :)



Hebster52 Offline
#30 Posted : 22 February 2016 20:29:39(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Now I will not be able to go out to the car garage for two weeks due to winter holidays etc. But decided to work some "at distance" at home instead… So I started some woodworking out of Maple. Cut the big trees and chopped to suitable lengths 14 years ago with the thought of using for this cab frame…

So, here is the first part for the main bow… (Yes, I also have made the wooden table many years ago… ;) )

JD Offline
#31 Posted : 22 February 2016 21:05:08(UTC)
JD


Rank: pre67vw Junkie

Medals: Volksworld Elite: For getting your pre '67 VW featured in Volksworld Magazine

Joined: 15/05/2005(UTC)
Posts: 1,795
Location: Englishman in Germany

Thanks: 12 times
Was thanked: 11 time(s) in 11 post(s)
You´re really cracking on with this. Keep it up!
"John, you need to get a grip and STOP MOANING AT EVERYTHING. ThumbDown "

Hebster52 Offline
#32 Posted : 23 February 2016 16:54:51(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
All parts cut for rear upper bow. What is the thickness on the middle on originals?

usariemen Offline
#33 Posted : 23 February 2016 20:23:56(UTC)
usariemen


Rank: pre67vw Junkie

Joined: 22/09/2007(UTC)
Posts: 148
Location: Germany

Was thanked: 11 time(s) in 8 post(s)
In the middle. 71 Millimeters high and 20 Millimeters thick.



Along the lower edge there is an area where the thicknes goes down from the 20 to 15 Millimeters.
Master of my domaine.
usariemen Offline
#34 Posted : 23 February 2016 20:25:37(UTC)
usariemen


Rank: pre67vw Junkie

Joined: 22/09/2007(UTC)
Posts: 148
Location: Germany

Was thanked: 11 time(s) in 8 post(s)
Oh, the rear UPPER bow.
I check that one also.
Just a Minute.
Master of my domaine.
usariemen Offline
#35 Posted : 23 February 2016 20:41:01(UTC)
usariemen


Rank: pre67vw Junkie

Joined: 22/09/2007(UTC)
Posts: 148
Location: Germany

Was thanked: 11 time(s) in 8 post(s)
Number 1 is in the middle 30 Millimeters thick and 32 Millimeters high.
Number 2 is in the middle 30 Millimeters thick and 28 Millimeters high.

Edited by user 23 February 2016 20:54:23(UTC)  | Reason: Not specified

Master of my domaine.
Hebster52 Offline
#36 Posted : 23 February 2016 20:52:37(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Thank you! Was aiming at 30mm x 30mm so I was not too far off... :)
Hebster52 Offline
#37 Posted : 23 February 2016 20:59:28(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Would it be possible to get a photo where 2 is placed on top of 1 just to see if the lenghts differ much and also for comparison of the shapes.. ? :)

Edited by user 23 February 2016 21:00:11(UTC)  | Reason: typos..

usariemen Offline
#38 Posted : 23 February 2016 21:18:04(UTC)
usariemen


Rank: pre67vw Junkie

Joined: 22/09/2007(UTC)
Posts: 148
Location: Germany

Was thanked: 11 time(s) in 8 post(s)
I can make one tomorrow.
Master of my domaine.
Hebster52 Offline
#39 Posted : 24 February 2016 19:42:31(UTC)
Hebster52


Rank: pre67vw Junkie

Joined: 03/03/2004(UTC)
Posts: 312
Man
Location: Finland

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Glued and raw sawed.. :) Now to plane it to 31mm thick and then cut the bow shape.. :)

usariemen Offline
#40 Posted : 24 February 2016 20:51:41(UTC)
usariemen


Rank: pre67vw Junkie

Joined: 22/09/2007(UTC)
Posts: 148
Location: Germany

Was thanked: 11 time(s) in 8 post(s)
Here we go.
My new ones are already screwed to the metal frame.
I made pics of the old original ones.















Edited by user 24 February 2016 21:06:03(UTC)  | Reason: Not specified

Master of my domaine.
Users browsing this topic
Guest (2)
4 Pages<1234>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2017, Yet Another Forum.NET
This page was generated in 0.933 seconds.