Login Register
2splits
  • 2splits
  • pre67vw Junkie Topic Starter
16 years ago
OK, I'm stuck.

I installed my "turn-key" Okrasa yesterday, and when I installed the linkage, I found that the linkage would not reach both carbs. I extended the linkage as far as possible, but I cannot quite reach.

Any ideas?

Can I adjust the carb somehow to make it reach the linkage?

HELP!
Kevin

-51 Split Rag
-58 Ghia Cab with Okrasa
-57 356
Sponsor
Log-in to remove these ads
Andy Sparks
16 years ago
I have a linkage here do you want me to measure it? see if yours is the same?

Actally silly question, will do it tomorrow, my tape is outside, and i'm warm in here.

You sure you have the bracket in the right place?
You can never have too many accessories on your car. 🙂
2splits
  • 2splits
  • pre67vw Junkie Topic Starter
16 years ago

I have a linkage here do you want me to measure it? see if yours is the same?

Actally silly question, will do it tomorrow, my tape is outside, and i'm warm in here.

You sure you have the bracket in the right place?

"Andy Sparks" wrote:



Yes PLEASE.

Which bracket?
Kevin

-51 Split Rag
-58 Ghia Cab with Okrasa
-57 356
joe h.
16 years ago
Mine is about 241/2" from end to end.
1954 oval
2splits
  • 2splits
  • pre67vw Junkie Topic Starter
16 years ago
Yeah, mine too. About 25 inches fully extended.

So, do I need to change this piece on my carb?

 11712.jpg You have insufficient rights to see the content.
Kevin

-51 Split Rag
-58 Ghia Cab with Okrasa
-57 356
Andy Sparks
16 years ago
the triangle bit should be welded onto the fan shroud.

You can never have too many accessories on your car. 🙂
2splits
  • 2splits
  • pre67vw Junkie Topic Starter
16 years ago

the triangle bit should be welded onto the fan shroud.

"Andy Sparks" wrote:



Yeah, thats fine.

If I measure the rods that go into the carbs, at the longest point, they are 25 inches. I'd guess the spread on my Okrasa is 25 3/4.
Kevin

-51 Split Rag
-58 Ghia Cab with Okrasa
-57 356
Andy Sparks
16 years ago
Find a longer long nut? or get another one and put a thread down it?

Just a thought.

Do I have the same linkage well mines Mr Wobs?
You can never have too many accessories on your car. 🙂
Chris
16 years ago
Sorry to hijack the thread, Andy, saw on VZi what happened, hope you're Ok ! 😞
A day may come when the courage of men fails, when we forsake our friends and break all bonds of fellowship, but it is not this day.
Andy Sparks
16 years ago

Sorry to hijack the thread, Andy, saw on VZi what happened, hope you're Ok ! 😞

"SDV" wrote:



I'll live, look like Adam Ant with a yellow stripe at the moment.

Cheers
You can never have too many accessories on your car. 🙂
19zwitter52
16 years ago
Does anyone make the Okrasa linkage? Any help would be appreciated.
Andy Sparks
16 years ago
Yeah Steph but he is a hard man to get a hold of.
You can never have too many accessories on your car. 🙂
gimmesomeshelter
15 years ago
Hello-

I've never contacted this indvidual, but he advertises Okrasa and Denzel parts.

Denzel Parts 

Okrasa Parts 

Good luck,

Paul
Paul Vickerman

Go Bruins!
Similar Topics
Users browsing this topic